Autotool selected DELMIA V5 Robotics after speaking with various customers who recommended this solution. Its ability to interface with various CAD programs was recognized as a definite benefit. According to Steve Forrest, Autotool design engineer, DELMIA V5 Robotics has quickly proved its worth.
"We have used the software on a project where, without DELMIA V5 Robotics simulation, it would have been impossible to figure out how to have the robots interface with the various fixtures," said Forrest. "The two robots were in a fixed position. Simulation allowed us to optimize placement of the six different fixtures so that the robots could reach all positions and avoid any interferences."
DELMIA V5 Robotics is a 3D scalable, flexible, easy-to-use solution for tooling definition, workcell layout, robot programming, and workcell simulation. It can capture the underlying philosophy of and intent of the robot programmer. This enables the company to capture and reuse best practices, leverage programming knowledge, and automate the repetitive work of robot programming.
Autotool is currently using DELMIA V5 Robotics to create "what if" scenarios on an existing line where new equipment options are being analyzed. Autotool is creating a mockup design of the line and using simulation to study a number of new production scenarios including the addition of capital equipment as well as changes in the existing process. "V5 Robotics allows us to look at many different layout options and to quickly analyze where new equipment can be placed in relation to the robots to make sure there are no collisions," said Forrest. "Additionally, we avoid any investment in unnecessary capital equipment because we're proving everything virtually."
About Autotool
Founded in 1994, Autotool began with a vision of supplying automotive manufacturers and their suppliers with one source for their tooling and automation needs, from concept to finished product. Believing that a company is only as good as its people, they recruited electrical and mechanical engineers with an in-depth understanding of tooling design and years of experience in their respective fields. Their unique "hands-on" approach supports their customers throughout the installation of and mass production of every project. It is this hard work and dedication which has provided the foundation for their continued growth and expansion over the years. In 2000, Autotool moved to its current location, with the construction of a 40,000 square foot manufacturing facility. This expansion allows them the flexibility of completing large projects or several smaller ones concurrently. Autotool's reputation has been built on quality, precision and cleanliness, and they "accept nothing less than our customers total satisfaction." Information about Autotool Is available at http://www.autotoolinc.com
About DELMIA
DELMIA is a premier brand for digital manufacturing solutions, focused on two unique software applications that can be used to streamline manufacturing processes. DELMIA Automation provides solutions to digitally design, test and validate the control of a machine, workcell, or entire factory line and DELMIA PLM provides the process and resource capability to enable continuous creation and validation of manufacturing processes as related to the product throughout the entire product lifecycle. DELMIA serves industries where the optimization of manufacturing processes is critical, including automotive, aerospace, fabrication and assembly, electrical and electronics, consumer goods, plant, and shipbuilding sectors. Information about DELMIA is available at http://www.delmia.com
About Dassault Systemes
As a world leader in 3D and Product Lifecycle Management (PLM) solutions, the Dassault Systemes group brings value to more than 90,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systemes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance. The Dassault Systemes portfolio consists of CATIA for designing the virtual product - SolidWorks for 3D mechanical design - DELMIA for virtual production - SIMULIA for virtual testing and ENOVIA for global collaborative lifecycle management, including ENOVIA VPLM, ENOVIA MatrixOne and ENOVIA SmarTeam. Dassault Systemes is listed on the Nasdaq (DASTY) and Euronext Paris (#13065, DSY.PA) stock exchanges. For more information, visit http://www.3ds.com
CATIA, DELMIA, ENOVIA, SIMULIA and SolidWorks are registered trademarks of Dassault Systemes or its subsidiaries in the US and/or other countries.
Contact:
DELMIA Press Contact Americas: Lesinski & Associates (for DELMIA) Nancy Lesinski, 248-709-3040 Email Contact or DELMIA Press Contact United Kingdom: Sarah Cockburn-Price, +44 (0)161 789 8108 Email Contact or Dassault Systemes Press Contact EMEA: Anthony Marechal, + 33 1 55 49 84 21 Email Contact or Dassault Systemes Press Contact Americas: Derek Lane, 818-673-2243 Email Contact